* The operating pressure is 0.4MPa-2.0MPa, widely used in laser cutting industry, powder storage and drying, advanced spraying, medical, food industry, chemical industry, film, electronics, precision instrumentation, aerospace industry.
* High efficiency; the regeneration gas can flow through the adsorption pipeline without dead corners, and the regeneration gas can be used more fully.
* Stable; the multi-pipeline modular design of the adsorption chamber and the unique cylinder seat make the body structure very compact and reasonable, breaking through the traditional double-tower appearance structure, and the appearance of the entire equipment is beautiful and generous.
* Clean; Made of aerospace aluminum alloy, it will never rust.
* Small pressure drop; The inlet and outlet buffer chambers are designed so that the airflow passes through the inlet and outlet buffer chambers and the adsorption cavity to form convection, thereby reducing the pressure drop.
* Long life: The service life can reach 30 years, and it has been treated with oxidation and rust prevention.
*Easy maintenance; to replace the adsorbent, you only need to remove the 4 screws on the top cover with an Allen wrench, and the muffler can be removed and replaced with a light twist.
*The unique muffler emission design allows the moisture adsorbed on the surface of the adsorbent to be fully discharged, reducing the loss of regeneration gas.
*It does not belong to the special inspection category of pressure vessels. The volume of a single adsorption cylinder is less than 25L, and there is no need to re-inspect the pressure vessel every year, saving a lot of time and cost.
Post time: Apr-09-2025
